How to improve the working efficiency of the air flotation machine?

1. The work that needs to be done before starting the air flotation machine is to check the power circuit and perform a brief no-load operation to determine whether the pump and air compressor are turning correctly,Check for any noise or heating phenomenon, and jog the mixer after injecting clean water to determine if its direction of rotation is correct.Tap the floating slag collection reducer to observe whether its steering is correct, whether there is collision or instability, and eliminate it in a timely manner. Turn on the power switch of the dissolving machine and configure it according to the concentration requirements of the liquid medicine,

Stir until the concentration of the medicine is uniform, clean the air flotation machine thoroughly, and do not leave any foreign objects. Check whether the connecting parts are loose and the lubricating oil injection in the rotating parts.

2. Attention should be paid to the use of air flotation machines: It is necessary to ensure that the water level of the air flotation machine does not submerge the packing layer and is not lower than 0.6m, in order to avoid a large amount of undissolved air in the center, which affects the fluctuation effect.

If the water temperature inside the air flotation machine is low, the method of increasing the dosage can be adopted to compensate for the decrease in the buoyancy performance of air carrying flocs due to the increase in water viscosity, ensuring the quality of the effluent water; The air flotation machine is based on the flocculation of the reaction tank

Adjust the dosage of coagulant in a timely manner based on changes in the floating slag and effluent quality in the separation zone of the air flotation tank; Regularly operate the slag scraper to remove floating slag and establish a slag scraping system that is in line with the actual situation,When using an air flotation machine, it is important to understand its ability to remove dirt so that you can know how much area it can handle.